The telescope without it's shoud and with it's mirror covers installed. Note the turnbuckles on the base which secure the telescope's altitude motion when setting up and transporting it. These are an upgrade from the Obsession supplied rubber fasteners which break after only a little use.
The mirror covers removed.
The upper tube. Note that the diagonal has the optional dew heater attacment installed.
The lower tube "rocker box" and f/4.2 mirror.
The telescope with shroud and light baffles installed.
The Nexus Digital Setting Circles. Top left is the mount for the computer, center, the computer and it's user's manual, top and center left, the Altitude encoder and it's hardware. The azmuith encoder is mounted to the base of the telescope.
Coma corrector. At f/4.2, it's very nice if you'd like the edge of your field sharp.
Laser alingment tool. Essential for initial alingment.